maxis BOARD



maxis Board

Formworks spend a large labor force and the total cost of the project. For these reasons, an effort made to introduce a formwork system that is cost-effective and can be assembled, dismantled, and handled simply by labor. Hence, Maxiswood is offering two Innovative products to reduce the cost of construction projects.

PP Hollow Plastic Board

PP Hollow Plastic Formwork is a fifth-generation formwork after PVC. It is an energy-saving and green environmental protection product. It can completely replace the traditional steel formwork, wood formwork, square wood, and has a low amortization cost.

Hollow Board is called Polypropylene Plastic Construction Formwork, which is a lightweight, high strength, and can be reused at least 50 to 80 times depending on proper use and maintenance.

PP Hollow sheet available in size 1220x2440mm, comes in thickness of 12mm and 15mm


1. High-rise commercial buildings, mainly used for the roof, beam, wall, column, stair, and foundation casting.

2. Bridge tunnels.

3. Water conservancy and Hydropower projects.

4. Mine dikes and underground works


1. It can use 50 to 80 times, save project costs - One piece PP formwork is equivalent to 5 to 10 pieces of plywood/wood formwork.

2. High hardness, good tenacity, no expansion, and no shrinkage.

3. Lightweight compared to plywood formwork, easy to remove, and transportation safety.

4. Waterproof, non-hygroscopic, not layered, not swelling, size stable under the water.

5. Smooth surface, no need release agent, easy to clean, promising stable project quality.

6. Strong variability and excellent screw holding strength. It can be sawed, nailed, drilled, screwed and processed into any geometrical shape, complete with all the installation properties of solid wood.

7. These two form-works are corrosion-resistant, acid and alkali resistant, especially suitable for use in humid environments.

8. Environmentally friendly - These two materials meet the requirement of energy conservation and environmental protection.

Comparison between PVC and PP Hollow board?

What is the difference between PVC and PP Hollow board?

2. Weight difference - The PP formwork is lighter than the PVC formwork, and the PVC formwork has a higher density, so the PVC is heavier.

1. Acid and alkali resistance and strength- The acid and alkali resistance of the PVC formwork is better than that of the PP formwork. However, the hard characteristics of PVC make it easier to break compared to PP.

3. Temperature - PP formwork usable temperature range is about 0 to 80 degrees Celsius, while PVC formwork can use to the extent of 0 to 60 degrees Celsius.




PVC is rich in color, generally dark gray, light gray, black, ivory, transparent, and so on.


PP materials cannot be made transparent. Usual colors are gray, black and white